Aerial view of a wastewater clarifier
ServicesTechnical Approval & SLO

Technical Approval & SLO for Wastewater and Emissions

Technical studies so wastewater and emissions meet quality standards, WWTP planning, and support for the Operational Feasibility Letter (SLO) once facilities are ready.

When it applies

When are a Technical Approval and SLO needed?

Wastewater sample in a laboratory beaker
CertifiedISO 9001 · 14001 · 45001
  • ✓Businesses discharging wastewater to water bodies or the sea, or applying it to land, need a technical approval for wastewater quality standards.
  • ✓Businesses with stationary emission sources, such as boilers or process stacks, need a technical approval for emission standards.
  • ✓Technical approvals are part of the AMDAL or UKL-UPL process, so they must be prepared before the environmental document is assessed.
  • ✓Once the WWTP or emission control system is built and tested, an SLO is needed as proof the facility is fit to operate.
Scope of service

What we do for you

01
Wastewater technical study
Wastewater characteristics and flow, treatment system, compliance points, and wastewater quality monitoring.
02
Emission technical study
Emission source inventory, control systems, stacks, and an emission monitoring plan.
03
WWTP planning & construction
System concept matched to waste characteristics and capacity, through to civil construction.
04
SLO support
Preparing trial-run data, laboratory results, and supporting documents for the SLO application.
05
Environmental document alignment
Aligning the technical approval with the AMDAL or UKL-UPL to avoid repeated revisions.
06
Periodic monitoring
Support for monitoring and reporting against standards once facilities operate.
Emission control units on an industrial building
PT Enviro Resources Indonesia

From quality standard studies and WWTP design to a facility fit to operate.

ISO 9001 · 14001 · 45001Office in SidoarjoStudy to construction
How it works

Our process

01
Needs assessment
Determining which technical approvals are needed.
02
Study & planning
Technical study and treatment system design.
03
Technical approval
Submission, review, and revisions.
04
Facility construction
Building or upgrading the WWTP and emission controls.
05
Trial run & SLO
Trial operation followed by the SLO application.
Preparation

Information to prepare

It does not need to be complete. Send what you have and we will help list what is missing.

✓Water balance and wastewater flow
✓Production process and chemicals used
✓Wastewater or emission lab results (if available)
✓WWTP layout, channels, outlets, and discharge points
✓Emission source data: fuel, capacity, operating hours, stack dimensions
✓Existing environmental documents and permits
Send your data via WhatsApp
FAQ

Questions about Technical Approval & SLO

Still have questions? Ask our team directly.

A technical approval is a government approval setting out the environmental protection standards that must be met, such as wastewater or emission quality standards. The procedure is set out in Ministerial Regulation 5/2021.

A Pertek is obtained at the planning stage as the basis for design and the standards to meet. An SLO is issued after the facility is built and trial results show the standards are met, confirming it is fit to operate.

It depends on the estate’s management scheme and your agreement with the central WWTP operator. We can review it based on the estate documents and your activity.

Yes. Beyond studies and permitting, we handle system planning and civil construction of waste treatment infrastructure.

Contact

Let's discuss your company's environmental needs